BLEACH – HYPOCHLORITE SANITIZER

BLEACH is an unperfumed stabilised Sodium Hypochlorite solution for disinfection & stain removal in the Food Industry, as well as
chlorination of process water.

BLEACH can also be mixed with TC120 Neutral Liquid Detergent for use as a one stage Detergent/Sanitizer.

BLEACH is recommended as a disinfectant for all CIP systems.

BLEACH is suitable for fog disinfection.

BLEACH is safe for use on all surfaces & equipment, in drains, gullies, waste pipes and refuse containers.

FEATURES AND BENEFITS OF BLEACH

BLEACH is unperfumed and therefore suitable for all food industry applications.
BLEACH contains a high level of available Chlorine allowing economic dilutions of maximum disinfection.
The Chlorine compounds used in BLEACH allow the product to be used as a highly effective stain remover.
BLEACH contains a corrosion inhibitor allowing the product to be used on all metals.
When used in conjunction with TC120 Neutral Liquid Detergent, an ideal “one shot” detergent for combined cleaning & disinfection.
BLEACH can be blended with dilute alkaline detergents to create a pertising effect for the efficient removal of proteinaceous soiling.

PACKAGING

BLEACH is packed in 5lt, 4x5lts & 25lt containers

RECOMMENDATIONS

USE AT MAXIMUM TEMPERATURE OF 55 °C

For stain removal and disinfection/deodorization of drains, gullies etc. use BLEACH at a concentration of 0.6% (6ml/l). For chlorination of
process water and as a disinfectant in Power Cleaning Systems. BLEACH should be used a concentration of 0.025%
(yields 25 ppm available Chlorine). When used with TC120 solutions
of 0.6% (6ml/l BLEACH) should be combined with either 0.6% (6ml/l) or 1.2% (12ml/l) TC120 depending on the degree of soiling.

CIP Systems – use a 0.2% (2ml/l) solution of BLEACH in cold water. Circulate for 5 to 10 minutes and then flush with clean water.

Laundry Bleach – add bleach to water during the first rinse cycle. DO NOT pour directly onto fabric. Fabric damage will occur. Use only on
WHITE work.

A 1% solution of BLEACH contains 800ppm available chlorine.

PHYSICAL PROPERTIES

SG/BULK DENSITY = 1,15
PH (1% SOL.) – 11,07

SAFETY PRECAUTIONS

Keep BLEACH upright and store away from heat and direct sunlight.
Rinse off accidental splashed with water.
For accidental contact with eyes, bathe well and seek medical advice.
If accidentally swallowed, drink plenty of milk or water and seek medical advice.
Do NOT mix BLEACH with CONCENTRATED alkaline or acidic products.