FLOORSEAL WATER BASED

FLOORSEAL WB – Acrylic emulsion for sealing floors, Walls and Roof tiles .

FLOORSEAL WB – Acrylic emulsion for sealing floors, Walls and Roof tiles .

FLOORSEAL WB is a white concentrated liquid floor sealer.
FLOORSEAL WB is suitable for treating Stone, Concrete, Cement, bricks and Vinyl.
FLOORSEAL WB is suitable for interior and exterior surfaces.
FLOORSEAL WB is detergent resistant and resistant to most chemicals.
FLOORSEAL WB forms a hard glossy long wearing surface.
FLOORSEAL WB is very durable to normal traffic.
FLOORSEAL WB is water and oil resistant.
FLOORSEAL WB is reasonably stain resistant.
FLOORSEAL WB is easy to apply.

FEATURES AND BENEFITS OF FLOORSEAL WB

·         FLOORSEAL WB has built in levelling agents to ensure an even thickness.
·         FLOORSEAL WB contains a QAC disinfectant to reduce fungus regrowth.
·         FLOORSEAL WB contains ammonia to prevent the solution going hard before while in storage.
·         FLOORSEAL WB contains an anti-static agent to prevent static build-up.
·         FLOORSEAL WB is not slip resistant on smooth surfaces.
·         FLOORSEAL WB is un-perfumed therefore is suitable for food factories and kitchens.
·         FLOORSEAL WB is suitable for use on Vinyl, Brick, Concrete, Cement, Marble and porous Vinyl surfaces.

PACKAGING

FLOORSEAL WB is packed in 5Lt and 25Lt drums.

RECOMMENDATIONS

The following application system should be used as a guide. Further information is available from your TECHCLEAN Representative.

STEPS: PREPARATION AND APPLICATION
STEP 1: STRIP FLOOR THOROUGHLY WITH FLOORSTRIP IF SOILED
STEP 2: RINSE THOROUGHLY WITH WATER AND ALLOW TO DRY
STEP 3: ACID ETCH THE SURFACE AND RINSE BEFORE ALLOWING TO DRY THOROUGHLY.
STEP 4: APPLY NEAT FLOORSEAL WB USING A BRUSH, ROLLER OR BACKPACK
STEP 4: ALLOW TO DRY FOR 30-60 MINUTES BEFORE APPLYING ANOTHER COAT
STEP 5: APPLY A THIRD COAT IF DESIRED.
STEP 6: ALLOW TO HARDEN OVERNIGHT FOR BEST RESULTS

Can be removed with Aggressive solvents.

SAFETY PRECAUTIONS
Wear suitable gloves, goggles, overalls and boots when applying FLOORSEAL WB.
Wash skin with soap and water if direct contact is made.
Eyes should be rinsed with clean water if contact occurs.