FABGUARD- is water repellent.
FABGUARD- offers better resistance to water staining.
FABGUARD- is easily applied using a suitable spray applicator.
FABGUARD- should only be applied on detergent free material.
FABGUARD- should be applied in a well ventilated area.
FABGUARD- should be tested on a test sample of fabric before full scale application is applied
FABGUARD- should be re-applied to carpets every six (6) months or in high traffic areas
every three (3) months.

FEATURES AND BENEFITS OF FABGUARD.
FABGUARD- is a solvent based silicone water repellent for fabric, laminates and leather.
FABGUARD- allows mud to brush off easily.
FABGUARD- reduces water penetration when leather flexes.
FABGUARD- gives better resistance to water staining on leather.
FABGUARD- contains solvent for quick drying properties
FABGUARD- contains no added colorants to cause unwanted staining.
FABGUARD- contains pleasant perfume to enhance the finish.

FABRIC TREATMENT
To avoid re-wetting problems, the fabric should be free from detergents or water
before applying FABGUARD.
A variety of application technique can be used:

padding ,lick roller spraying or immersion.

The required amount of FABGUARD required depends on the fabric and the level of water
repellent required. Generally a level of 1.5 % and 3% by weight by weight of fabrics required.
Trials should be conducted on test samples.
After treatment, the fabric should be air dried to remove solvent and to allow the water
repellent to develop. This normally takes three days but can be reduced by a short heat
cure (45 deg C or 113 deg F)

LEATHER TREATMENT
FABGUARD can be used effectively on a wide variety of leathers, including side upper leather,
suede, calf skin, garment leathers and imitation suede. It can be applied in the tannery by
dipping, curtain coating, padding and spraying. Made up goods can be treated by spraying.
For maximum water repellent it is necessary to ensure complete penetration of the leather by
FABGUARD . When no pigment finish is used , the FABGUARD solution should preferably be
applied from both sides to ensure good penetration. Where a pigment finish is required, apply
FABGUARD to the flesh side only to avoid adhesion problems on finishing.

HANDLING PRECAUTIONS
since water tends to form an insoluble precipitate with FABGUARD, care should be taken to
avoid water contamination while in store or in store. Open containers should be resealed
be resealed tightly.

PACKAGING
FABGUARD is packed in 500ml tin

SAFETY PRECAUTIONS
For sensitive skins or prolonged immersion of hands in FABGUARD solutions, gloves to be worn
For accidental eye contact, Bathe well and seek medical advice
FABGUARD contains solvents use in a well ventilated area.