ET156 is a highly caustic liquid detergent, formulated for use in all CIP systems as a detergent and problem solver. ET156 can also be used for
tenacious soiling on floors, walls and scrubbing machines, but extreme caution should be exercised where these machines have aluminium
or brass parts
FEATURES AND BENEFITS OF ET156
ET156 container is colour coded red to indicate that the product contains chemicals which could be harmful to the skin or other tissues, and
that caution should be exercised with its use. This colouring also leads to easier recognition by unskilled labour.
ET156 contains a high proportion of Caustic Soda, allowing rapid breakdown of most types of heavy to extremely heavy soiling.
ET156 is effective in hard and soft water areas.
ET156 can utilised as a “problem solver” to effectively clean areas or surfaces needed a shock treatment
ET156 is unperfumed and therefore suitable for all food industry applications.
PACKAGING
ET156 is packed in 25 litre rondatainers, 200 litre drums and bulk.
RECOMMENDATIONS
CIP: Dilute 1.5% v/v (15 ml/l ) for 1% of NaOH. Circulate at 60 to 80oC for 15 to 20 minutes for best results and rinse well. If scaling exists
circulate with TC 475 Liquid Acid Descaler or TC 483 Powder Acid Descaler. Consult your TECHCLEAN Representative For detailed methods.
FLOOR CLEANING
To remove stubborn soiling ( such as fork lift tyre marks ) spray a 50% v/v solution of ET156 onto the floor and allow to soak in thoroughly
before brushing off or scrubbing off mechanically. Rinse well.
BOTTLEWASHING
% NaOH Dilutions of ET156 ( v/v )
1% 1.5% ( 15ml/l ) in hot water.
2% 3.0% ( 30ml/l ) in hot water.
3% 4.5% ( 45ml/l ) in hot water.
PHYSICAL PROPERTIES
SG / BULK DENSITY = 1,45
Ph. ( 1% SOL ) = 13,14
SAFETY PRECAUTIONS
Always add ET156 to water, and NOT WATER to ET156.
ET156 contains caustic soda so caution should be exercised with its use and full protective clothing must be worn.