Non caustic detergent / solvent cleaner. Made to SABS 1344 specifications

ET166 is a clear blue concentrated liquid detergent for general cleaning.
ET166 is suitable for cleaning utensils, floors, walls, equipment, and vehicles.
ET166 is suitable for applying to collars and cuffs prior to washing.
ET166 removes mildew from showers and other surfaces.
ET166 is suitable for cleaning windows and glassware.
ET166 can be used for just about any cleaning task.
ET166 is suitable for use through steam cleaners, pressure washers and floor scrubbing machines.

FEATURES AND BENNEFITS OF ET166
·         ET166 has a blend of solvents to dissolve stubborn oil and grease from most surfaces.
·         ET166 has an optimum level of wetting agents to enable it to penetrate porous surfaces and be effective, yet still rinse off easily.
·         Because ET166 is non-caustic it is completely safe to use on all surfaces, including aluminium.
·         Sufficient sequestering agent is included in ET166 for all water conditions found in South Africa, making the product effective in hard and soft water areas.
·         ET166 is volatile and therefore should be stoppered on storage.
·         ET166 is unperfumed and therefore suitable for all food industry applications.
·         ET166 has anti-corrosion agents built in to reduce corrosion.

PACKAGING
ET166 is packed in 25Lt and 5Lt drums.

RECOMMENDATIONS
Dilutions of ET166 can be varied through a wide range according to the degree of soiling present. The following dilution should be used
as a guide and further information is available from your TECHCLEAN Representative.

Soiling

Light : 1.0 % ( 10 ml/l ) in cold water. ( windows, glassware, paintwork )
Medium : 10.0 % ( 100 ml/l ) in cold or warm water. ( general cleaning )
Heavy : 50.0 % ( 500 ml/l ) in cold or warm water. ( greasy surface )
Very heavy : USE NEAT ( mildew, car engines and brake dust, clothing, ink etc. )

ET166 contains detergents and solvents all surfaces all surfaces should be thoroughly rinsed with potable water after cleaning.
ET166 is best applied using a trigger spray applicator, steam cleaner or pressure washer. Soak tanks can also be used if required.
ET166 is more effective if it has reached on the surface for 5 to 10 minutes.

SAFETY PRECAUTIONS

ET166 should be stored at room temperature in a stoppered container.
Accidental contact with sensitive skin, rinse well with water.
For accidental eye contact, bathe well with water and seek medical advice.